Pattern imprinted concrete driveways in Bristol, sealed and stamped on site.
One continuous, reinforced concrete slab, coloured and stamped with the pattern of your choice while still wet, then sealed with a UV-stable acrylic finish. Tough and joint-free, it covers a large area in one continuous pattern.
- 5-Year GuaranteeOn every installation
- Marshalls ApprovedAccredited Bristol installer
- Fully InsuredPublic liability cover
- Free Site SurveyAcross Bristol & surrounds
What is imprinted concrete
One slab, dozens of patterns, sealed for the long term.
Imprinted concrete is poured as one reinforced slab, coloured through with iron-oxide pigment, then stamped with rubber moulds while still wet to imitate cobblestone, brick, slate, ashlar and more. Once cured, the surface is sealed with a UV-stable acrylic to lock in the colour and protect against staining.
The result is the look of natural stone or brick in one continuous slab, with no joints to weed and no individual units to subside. We've installed imprinted concrete driveways across Bristol for over 20 years and still re-seal jobs we laid in the early 2000s.
- Free Bristol-wide site visit
- One continuous slab, no joints
- Re-sealed every 3-5 years
One surface, no joints
No individual units to subside, no joints to weed. One continuous reinforced slab.
Dozens of patterns and colours
Cobblestone, slate, brick, ashlar or basket-weave, stamped into the concrete while wet.
Tough as you like
Reinforced concrete is rated for heavy vehicles. Used on commercial forecourts as well as driveways.
Re-seal every 3-5 years
Routine acrylic re-seal keeps the colour fresh. We offer this as a stand-alone service.
Patterns & colours
Imprinted concrete patterns we install.
A small selection of the patterns and colours Bristol homeowners ask us for most. Full pattern board available at the site visit.
How we install it
Our 4-stage imprinted concrete process.
Imprinted concrete is a one-shot pour and the timing is everything. We work in tight crews to pour, colour, stamp and finish before the slab sets.
Site survey & prep
Free Bristol visit, design and pattern choice. Existing surface removed, formwork set out, drainage and edging detailed.
Reinforced sub-base
Type 1 MOT compacted, then reinforced steel mesh laid for crack control. Drains and channels collared in.
Pour, colour & stamp
Concrete poured to depth, colour-hardener broadcast, then rubber mats stamped in while the slab is plastic.
Cure & seal
Slab cures for 48 hours, then washed clean, jointed up and sealed with two coats of UV-stable acrylic.
Recent work
Our recent work
Before your survey
Plan the joints, drainage and aftercare
Compare the pattern and border with the proposed joint positions. Ask the written quote to identify the colour system, drainage, sealer and maintenance requirements, with clear advice on when pedestrian and vehicle access can resume.
For front-garden paving, check the official guidance on permeable surfacing and any restrictions with your local planning authority.
FAQ
Common questions
Will the concrete crack?
Properly reinforced and detailed, no. We mesh-reinforce every slab and cut control joints into the stamping pattern so any movement happens at predictable, hidden lines. Crack-free installations are the norm for us, and our 5-year guarantee covers cracking specifically.
How often does it need re-sealing?
Every 3 to 5 years, depending on traffic. The acrylic seal protects the colour from UV and stops oil and tyre marks penetrating. We offer re-sealing as a stand-alone service for Bristol homeowners with existing imprinted concrete driveways.
Will the colour fade over time?
The colour is through-pigmented, so even when the surface seal wears, the colour stays in the slab. A fresh re-seal restores the original wet look. We've re-sealed driveways we laid 15 years ago and they look like new again.
Is it slippery when wet?
We add an anti-slip grit to the sealer on every driveway, ramp or slope. Done properly, imprinted concrete is no more slippery than block paving in the wet, and we'll always recommend a higher anti-slip mix on inclines.
Get a free imprinted concrete quote in Bristol.
Arrange a free site survey to discuss the finish, preparation, drainage and access. Review the written scope and terms before agreeing to the work.